Mintex Synthetic DOT 4 Brake Fluid - 500ml
Meets or exceeds DOT 3 and DOT 4 specifications and provides excellent performance in high- temperature braking systems. Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids.
Mintex Synthetic Brake Fluid is designed to provide a high margin of boiling point protection. The proprietary mix of polyglycol ethers ensures the hot brake system operation will not create dangerous liquid vapour. This delivers braking power when needed by avoiding a spongy peddle. The wet and dry boiling points exceed the minimum government standards. A comprehensive inhibitor package protects vital brake system metals.
Technical:
- Minimum Dry Boiling Point 500F (260C).
- Minimum Wet Boiling Point 311F (155C).
- Meets or exceeds DOT 3 and DOT 4 specifications.
- Substantially reduces the possibility of fluid vaporization and eventual brake failure (as a result of vapour lock) by maintaining a high wet boiling point.
- Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids.
- Compatible with all conventional brake fluids.
- Complies with Federal Motor Vehicle Safety Standard 116, Meets SAE Spec, J1703.
Instructions:
1. Clean all dirt from around cover on master cylinder before removing.
2. Fill unit to level specified by manufacturer.
3. Replace cover.
4. Check fluid level once a month.
To Bleed System:
Refer to service manual. Do not re-use brake fluid.
Meets or exceeds DOT 3 and DOT 4 specifications and provides excellent performance in high- temperature braking systems. Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids.
Mintex Synthetic Brake Fluid is designed to provide a high margin of boiling point protection. The proprietary mix of polyglycol ethers ensures the hot brake system operation will not create dangerous liquid vapour. This delivers braking power when needed by avoiding a spongy peddle. The wet and dry boiling points exceed the minimum government standards. A comprehensive inhibitor package protects vital brake system metals.
Technical:
- Minimum Dry Boiling Point 500F (260C).
- Minimum Wet Boiling Point 311F (155C).
- Meets or exceeds DOT 3 and DOT 4 specifications.
- Substantially reduces the possibility of fluid vaporization and eventual brake failure (as a result of vapour lock) by maintaining a high wet boiling point.
- Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids.
- Compatible with all conventional brake fluids.
- Complies with Federal Motor Vehicle Safety Standard 116, Meets SAE Spec, J1703.
Instructions:
1. Clean all dirt from around cover on master cylinder before removing.
2. Fill unit to level specified by manufacturer.
3. Replace cover.
4. Check fluid level once a month.
To Bleed System:
Refer to service manual. Do not re-use brake fluid.